DeviceNet protocol
The ACU20FD digital mass flow meter consists of a mass flow sensor, a laminar flow element, a flow control valve, and an amplification and control circuit. It uses digital signal input and output and features a short preheating time, small zero drift, and high reliability.
Overview
Applications
Specifications
Software
◆ Thermal principle, higher accuracy, faster response, with network port
◆ Tubular flow distribution, not easy to block
◆ Suitable for various low-pressure and high-pressure pipelines
◆ Short preheating time, small zero drift, high reliability
◆ Analog input/output can be used to control and display flow rate with a secondary instrument or flow computer
ACU20FD High-Precision Mass Flow Meter/Flow Controller It adopts the principle of capillary heat transfer method to measure the mass flow rate of gas, which is not affected by temperature and pressure. The flow signal measured by the sensor is amplified and then compared with the set voltage. The obtained difference is used to drive the control regulating valve to close-loop control the flow rate through the channel so that it is equal to the set flow rate.
| Glass industry | Solar energy | Atmospheric monitoring | Industrial manufacturing | Petroleum and petrochemical |
| Coal and metallurgy | Gas production and distribution | Environmental protection | Various instrument analysis | |
| Product Model | ACU20FD |
| Measurement Range | 2SCCM～10000SLM |
| Measurement and Control Range | Flow meter measurement range ratio 100:1, controller measurement range ratio 50:1 |
| Accuracy | ±0.5%F.S |
| Linearity | ±0.5%F.S |
| Repeatability | ±0.2%F.S |
| Response Time | Flow meter: <0.1s |
| Flow controller: <0.2s | |
| Digital | DeviceNet protocol |
| Analog | 0～5V、4-20mA、1～5V |
| Power Supply | ±15VDC，24VDC |
| Operating Temperature | 0～50℃ |
| Operating Pressure | Operating pressure drop: <0.01Mpa |
| Maximum Pressure Resistance | 3MPa/10MPa |
| Electrical Connection | DB9 port |
| Leakage Rate | 1×10-9Pa m3/S |
| Temperature Coefficient | ±0.025%F.S/℃ |
| Base Material | Stainless steel |
| Sealing Material | Viton, chloroprene rubber, nitrile rubber |
| Connector | φ3，φ6，1/8"，1/4" |
Mass flow measurement and control system V5.0
