Anemometer

The thermal flow sensor measures the flow rate and temperature of air and gases and has a limited-range signal output, with an LED display showing the sensor's operating status. It features a compact design, fast single-hole mounting, and flow measurement that does not require pressure and temperature correction. It can be used for combustion gas control, gas measurement in drying systems, etc.

Category: Customized Products

Overview

Applications

Specifications

The thermal flow sensor measures the flow rate and temperature of air and gases and has a linear signal output. An LED displays the sensor's operating status (normal or error). The compact plug-in sensor is installed in the air duct and features a highly accurate probe.

◆Fast single-hole installation

◆Flow measurement requires no pressure and temperature correction

◆Low pressure loss

◆Compact design

◆Probe tube length up to 500mm

Air duct flow measurement, volumetric flow measurement, combustion gas control (e.g., oil, carbon, wood, or combustion gases), gas measurement in drying systems

Technology/Design Plug-in thermal sensor
Anemometer Range 2.5/10/20/40/50m/s (20℃, 101.325KPa)
Lower Limit of Anemometer Range 0.2m/s
Anemometer Measurement Accuracy ±(5% of measured value + 0.4% of range)
Temperature Range -20~85℃/120℃
Temperature Measurement Accuracy ±2℃
Operating Pressure Atmospheric pressure (700~1300hPa)
Operating Temperature Medium: -20~+85℃/120℃ Electronic components: -20~+70℃
Response Time 3s
Installation Length 50/100/200/350/500mm
Mounting Method External thread M18*1 Optional threaded sleeve connector 1
Analog Output 0~10V/0~20mA/4~20mA linear
Display LED green: Ready LED red: Sensor error
Supply Voltage 24VDC±20%
Current Consumption 30mA max
Electrical Connection 4-pin cable, fixed connection, 2m length
Housing Material PBT, fiberglass
Sensor Material White, glass passivated
Probe Tube Material Stainless steel 1.4571
Weight 100g
Protection Class

IP65 (housing)

IP65 (probe tube)